Infineon Cypress EZ-BLE CYBLE-022001-00, Руководство пользователя

Страница: 38 / 42

CYBLE-022001-00
Document Number: 001-95662 Rev. *N Page 37 of 41
Document History Page
Document Title: CYBLE-022001-00, EZ-BLE™ Creator Module
Document Number: 001-95662
Revision ECN
Submission
Date
Description of Change
** 4662055 02/18/2015 Preliminary data sheet for CYBLE-022001-00 module.
*A 4679323 03/09/2015 Updated Overview :
Updated Module Description :
Updated Module Dimensions and Drawing :
Updated Figure 1 (Updated Module Pad Assignment).
Updated Recommended Host PCB Layout :
Updated Table 3 :
Updated table caption to read as “Module Solder Pad Connection Dimensions”.
Updated Table 4 :
Changed Pad 10 from NC to GND.
Updated Power Supply Connections and Recommended External Components :
Updated External Component Recommendation :
Updated Figure 7 (Changed Pad 10 from NC to GND).
Updated Figure 8 (Changed Pad 10 from NC to GND).
Updated Figure 9 (Changed Pad 10 from NC to GND).
*B 4710754 04/01/2015 Updated Document Title to read as “CYBLE-022001-00, EZ-BLE™ Creator Module”.
Replaced terms “pre-certified” with “certified” and “pre-qualified” with “qualified”
respectively in all instances across the document.
Updated General Description :
Updated Module Description :
Updated description.
Added hyperlinks in required places.
Updated Power Consumption :
Updated description.
Updated Functional Capabilities :
Updated description.
Updated Electrical Specification :
Updated Table 10 :
Updated details in “Details/Conditions” column of T
STOP
parameter to “XRES wakeup”.
Updated Acronyms :
Added “QDID”.
*C 4812402 06/23/2015 Changed status from Preliminary to Final.
Updated General Description :
Updated Module Description :
Updated description.
Updated Functional Capabilities :
Change number of capacitive sensors supported from 13 to 15.
Updated Power Supply Connections and Recommended External Components :
Updated Power Connections :
Updated description.
Updated Figure 9 (To final design schematic).
Updated Electrical Specification :
Update Table 9 :
Changed typical value of I
DD15
from 1.3 µA to 1.5 µA.
Updated Ordering Information :
No change in part numbers.
Added Part Numbering Convention .
Added Packaging .
Updated Acronyms :
Added “SMT”.