CYBLE-022001-00
EZ-BLE™ Creator Module
Cypress Semiconductor Corporation
198 Champion Court
San Jose
,
CA 95134-1709
408-943-2600
Document Number: 001-95662 Rev. *N
Revised December 23, 2020
EZ-BLE™ Creator Module
General Description
The Cypress CYBLE-022001-00 is a fully certified and qualified
module supporting Bluetooth
®
Low Energy wireless
communication. The CYBLE-022001-00 is a turnkey solution
and includes onboard crystal oscillators, chip antenna, passive
components, and Cypress PSoC
®
4 Bluetooth LE. Refer to the
PSoC 4 Bluetooth LE
for additional details on the
capabilities of the PSoC 4 Bluetooth LE device used on this
module.
The CYBLE-022001-00 supports a number of peripheral
functions (ADC, timers, counters, PWM) and serial
communication protocols (I
2
C, UART, SPI) through its
programmable architecture. The CYBLE-022001-00 includes a
royalty-free Bluetooth LE stack compatible with Bluetooth 5.1
and provides up to 16 GPIOs in a small 10 × 10 × 1.80 mm
package.
The CYBLE-022001-00 is a complete solution and an ideal fit for
applications requiring Bluetooth LE wireless connectivity.
Module Description
■
Module size: 10.0 mm ×10.0 mm × 1.80 mm (with shield)
■
Bluetooth 5.1 single-mode module
■
Industrial temperature range: –40 °C to +85 °C
■
32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit
multiply, operating at up to 48 MHz
■
128-KB flash memory, 16-KB SRAM memory
■
Watchdog timer with dedicated internal low-speed oscillator
(ILO)
■
Two-pin SWD for programming
■
Up to 16 GPIOs configurable as open drain high/low,
pull-up/pull-down, HI-Z analog, HI-Z digital, or strong output
■
Certified to FCC, ISED, MIC, KC, ANATEL, and CE regulations
❐
FCC ID: WAP2001
❐
IC ID: 7922A-2001
❐
MIC ID: 005-101007
❐
KC ID: MSIP-CRM-Cyp-2001
■
Bluetooth SIG 5.1 qualified
❐
QDID:
❐
Declaration ID:
Power Consumption
■
TX output power: –18 dbm to +3 dbm
■
Received signal strength indicator (RSSI) with 1-dB resolution
■
TX current consumption of 15.6 mA (radio only, 0 dbm)
■
RX current consumption of 16.4 mA (radio only)
■
Low power mode support
❐
Deep Sleep: 1.3 µA with watch crystal oscillator (WCO) on
❐
Hibernate: 150 nA with SRAM retention
❐
Stop: 60 nA with XRES wakeup
Functional Capabilities
■
Up to 15 capacitive sensors for buttons or sliders with
best-in-class signal-to-noise ration (SNR) and liquid tolerance
■
12-bit, 1-Msps SAR ADC with internal reference,
sample-and-hold (S/H), and channel sequencer
■
Two serial communication blocks (SCBs) supporting I
2
C
(master/slave), SPI (master/slave), or UART
■
Four dedicated 16-bit timer, counter, or PWM blocks
(TCPWMs)
■
Programmable low voltage detect (LVD) from 1.8 V to 4.5 V
■
I
2
S master interface
■
Bluetooth Low Energy protocol stack supporting generic
access profile (GAP) Central, Peripheral, Observer, or
Broadcaster roles
■
Switches between Central and Peripheral roles on-the-go
■
Standard Bluetooth Low Energy profiles and services for
interoperability
■
Custom profile and service for specific use cases
Benefits
The CYBLE-022001-00 module is provided as a turnkey
solution, including all necessary hardware required to use
Bluetooth LE communication standards.
■
Proven, qualified, and certified hardware design ready to use
■
Small footprint (10 × 10 mm × 1.80 mm), perfect for space
constrained applications
■
Reprogrammable architecture
■
Fully certified module eliminates the time needed for design,
development and certification processes
■
Bluetooth SIG qualified with QDID and Declaration ID
■
Flexible communication protocol support
■
PSoC Creator™ provides an easy-to-use integrated design
environment (IDE) to configure, develop, program, and test a
Bluetooth LE application
