User Guide
4 of 56
002-32436 Rev. *B
<2021-06>
CY8CKIT-041S-
MAX PSoC™ 4100S Max pioneer kit guide
Safety and regulatory compliance information
Safety and regulatory compliance information
The CY8CKIT-041S-MAX PSoC
™
4100S Max pioneer kit is intended for development purposes only. This kit is not
a finished product and when assembled may not be resold or otherwise marketed unless all required
authorizations are obtained. Contact
for details.
PSoC
™
4100S Max pioneer boards contain electrostatic discharge (ESD) -
sensitive devices. Electrostatic charges readily accumulate on the human
body and any equipment, which can cause a discharge without detection.
Permanent damage may occur on devices subjected to high-energy
discharges. Proper ESD precautions are recommended to avoid performance
degradation or loss of functionality. Store unused PSoC
™
4100S Max pioneer
boards in the protective shipping package.
End-of-Life/Product Recycling
The end-of-life cycle for this kit is five years from the date of manufacture
mentioned on the back of the box. Contact your nearest recycler to discard
the kit.
General safety instructions
ESD protection
ESD can damage boards and associated components. It is recommended that you perform procedures only at
an ESD workstation. If such a workstation is not available, use appropriate ESD protection by wearing an
antistatic wrist strap attached to the chassis ground (any unpainted metal surface) on your board when
handling parts.
Handling boards
CY8CKIT-041S-MAX PSoC
™
4100S Max pioneer boards are sensitive to ESD. Hold the board only by its edges.
After removing the board from its box, place it on a grounded, static-free surface. Use a conductive foam pad if
available. Do not slide board over any surface.
