User Guide
9 of 25
002-34554 Rev. *A
2022-08-01
CY-SD4210 EZ-
USB™ SX3 HDMI 4K capture
kit guide
Programming the EZ-
USB™ CY
-SD4210 SX3 controller
4
Programming the EZ-USB™ CY-SD4210 SX3 controller
The EZ-
USB™ SX3
controller on the CY-SD4210 EZ-
USB™ SX3 HDMI 4K capture kit is preprogrammed with the
latest configuration at the time of manufacturing. However, check the
configuration.
The CY-SD4210 kit is preprogrammed with the firmware to stream 4K videos at 30 fps from an HDMI source. Use the
Configuration Utility only to change the program. Ensure that the tool version is 1.1.0.5 or higher.
1.
Open the EZ-
USB™
SX3 Configuration Utility. If the application is not present on the desktop, browse to the
SX3 SDK installation directory (
C:\Program Files (x86)\Cypress\EZ-USB SX3 Configuration Utility
).
Figure 3
SX3 Configuration Utility home screen
2.
Click
Import
. Select
SX3 Template Project
and click
(…)
.
Figure 4
Import configuration screen
