User Guide
5 of 25
002-34554 Rev. *A
2022-08-01
CY-SD4210 EZ-
USB™ SX3 HDMI 4K capture
kit guide
Installing the kit software
2
Installing the kit software
This chapter describes the procedure to install software for the CY-SD4210 kit.
2.1
Before you start
The installation of the SX3 Configuration Utility software and other Infineon software may require
administrator privileges. However, privileges are not required to run the software once it is installed.
2.2
Install SX3 Configuration Utility software
Download and install the EZ-
USB™
SX3 Configuration Utility from
https://www.infineon.com/cms/en/design-
support/tools/configuration/usb-ez-usb-sx3-configuration-utility
to configure and evaluate the example
templates on the CY-SD4210 kit.
Installable packages are available for Windows, Linux and macOS.
After the installation is complete, the contents are available at
<Install Directory>\
EZ-USB SX3 Configuration
Utility.
Note:
1.
For working with CY-SD4210 kit, SX3 Configuration Utility tool version should be v1.1.0.5 or higher.
2.
The default <Install Directory> is C:\Program Files(x86)\Cypress.
3.
See
