Infineon AIROC IFW56810, Начало работы

Страница: 15 / 22

Application Note 15 of 22 002-34322 Rev. *A
2021-12-14
Getting started with AIROC™ IFW56810 Single -band Wi-Fi 4 Cloud
Connectivity Manager
Advanced AT commands
5 Advanced AT commands
Wait for a response from the IFW956810 CCM evaluation kit in the serial terminal after entering each AT
command.
5.1 Publish to a non-default topic
•
Enter the following commands in sequence in the serial terminal:
AT+CONF Topic1=/MyPubTopic
AT+SEND1
5.2 Subscribe to a non-default topic
1.
Enter the following commands in sequence in the serial terminal:
AT+CONF Topic2=/MySubTopic
AT+SUBSCRIBE2
2.
Do the following on the AWS IoT Console:
a)
Select the MQTT client, and then select Publish to a topic .
b)
Type
MySubTopic
in the Topic name field. Keep the “Hello from the AWS IoT Console” message.
c)
Click Publish .
3.
On your serial terminal, enter the following command:
AT+GET2
You will receive the message “ OK Hello from the AWS IoT Console ”.
Click here for a complete list of AT commands supported by the IFW956810 evaluation kit.