background image

5

Further information

GB

Disconnect LP Gas cylinder

Before disconnecting make sure the LP gas 

tank valve in “CLOSED”. Disconnect gas line 

from LP gas cylinder by turning knob

counterclockwise until it is loose.

For storage and cylinder exchange, discon-

nect  hose  at  the  cylinder  only,  DO  NOT 

disconnect hose from appliance.

To change the gas cylinder in an amply ven-

tilated  area,  away  from  any  ignition  source 

(candle,  cigarettes,  other  flame  producing 

appliances…).

LPG cylinder not provided. The appliance is 

designed to operate with a cylinder of size Ø 

31.8 x 58 cm.

This appliance requires a 15 kg butane LPG 

cylinder or a 13 kg propane LPG cylinder.

Gas regulator should be the correct one and 

be  set  according  to  specific  gas  category 

(see Technical data on page 3).

Gas regulator should be approved according 

to EN 12864 with proper capacity (g/h), pres-

sure, working temperature and inlet + outlet 

connection for the country of destination.

The regulator illustrated on the manual is for 

United Kingdom, the regulator in your country 

maybe different with the one on the illustration. 

Flexible gas rubber pipe should be approved 

according to EN 1763-1 with proper inner Ø 

to match pipe holders of gas circuit and gas 

regulator,  pressure  and  working  tempera-

ture.

The  length  of  the  hose  is  0.41  m  and  it 

should not exceed 0.7 m. The hose shall be 

readily  visible  across  its  entire  length  for 

inspection after installation.

Danger:

You  must  have  the  proper  regulator  and 

cylinder in order for the appliance to operate 

safely and efficiently. Use of an incorrect or 

faulty regulator is dangerous and will invali-

date any warranty.

Connect LP Gas cylinder

Before connecting, be sure that there is no 

debris  caught  in  the  head  of  the  LP  tank, 

head of the regulator valve or in the head

of the burner and burner ports.

Connect  gas  line  to  tank  by  turning  knob 

clockwise until it stops, make sure that the 

tube is not subject to twisting.

After connecting to gas cylinder, a leak test-

ing is necessary.

Important Notes:

Содержание SRPH67

















Отзывы: