infaco A3MV2-12V, Оригинальное руководство пользователя

Страница: 13 / 32

13
Recharging the battery
Disconnect connector on the A3MV2
3
from the battery
2
.
Connect plug on the charger to the 230 V 50 Hz supply in a well-ventilated room free of
inflammable products and sources of ignition.
Connect connector on the charger
1
to connector on the battery
2
.
The charger starts to work automatically as soon as the battery is connected.
A orange indicator light glows steady during the charging time. When the battery is fully
charged, the indicator light turns green and the charger supplies a holding charge.
If the indicator light on your charger does not light up, leave your battery connected and,
at the same time, disconnect the plug (230 V) from your charger and re-connect it until the
orange indicator lights light up.
For information, it takes about 5 hours to charge up the battery belt. Do not leave your
battery on charge for more than 15 hours.
The battery has sufficient autonomy to complete between 7000 and 8000 ties.
If you are thinking of doing more than 8000 ties a day, we advise you to:
1. Either recharge the battery for at least an hour during your lunch break to achieve
extra autonomy of approximately 3000 ties.
2. Or buy the 2-battery option.
N.B. a few minutes before your battery is completely discharged, the A3MV2 may lose speed
or no longer cut the wire.
Charger
indicator light
= in charge
= loaded
Battery
pack
A3MV2
2
1
3
14