C-COM Satellite Systems Inc.
Page 21 of 47
iNetVu
®
Fly-1201 User Manual
Polarization and Feed Arm Assembly Removal
6) Click/push Stow icon/button, the Antenna should go to the following coordinates:
EL=78, AZ =-60 and PL=0
.
7) Power off the 7000 Series controller.
Ensure to power off the 7000 Series Controller prior to
disconnecting cables.
8) Disconnect the internal PL Tilt Sensor, PL Motor cable and LNB RX coax cable
on the Feed Arm.
9) Loosen retaining nuts; detach the Feed Arm and POL Cage assembly from the
EL Feed Arm Support plate.
