manualshive.com logo in svg

Inertial Labs MRU-B, Руководство пользователя

Поделиться
Скачать
Inertial Labs MRU-B Скачать руководство пользователя страница 19

 

 

MRU 

Demo Program Manual

 

 

Inertial Labs, Inc

TM  

Address: 

39959 Catoctin Ridge Street, Paeonian Springs, VA 20129 U.S.A.

 

                    Tel: +1 (703) 880-4222, Fax: +1 (703) 935-8377

 

Website: 

www.inertiallabs.com

 

 

 

19 

4.2.3. Change of the COM port baud rate 

The default baud rate for MRU COM port is set to 115200 bps (maximum for 
the standard COM-port). If the host computer requires other baud rate for 
the MRU connection, then user can choose one from the next list: 4800, 
9600, 14400, 19200, 38400, 57600, 115200, 230400, 460800, 921600 bps. 
The same baud rate must be set in the «

Test Options

» of the MRU Demo 

Program. 

Notes:  

1. Baud rate change is implemented in the MRU firmware version since 2.2.0.0 and it is 
supported by MRU Demo Program since version 2.0.19.78 from 03/18/2016. 
2. To allow baud rate change the MRU unit must be connected to computer and 
powered. 
3. Standard COM-port of a host computer (PC) does not support baud rate greater than 
115200 bps. Therefore some Serial-to-USB adapter should be used for MRU connection 
to the host computer. 
4. Baud rate must be set the same both for MRU unit and in the MRU Demo Program to 
allow this software to control MRU unit. 

 

At the first, set correct COM port baud rate in the «

Test Options

»  (see 

Fig.4.1). It must be the same as it set in the MRU unit. If COM port baud rate 
in the MRU unit is unknown then click «

Auto

» button. After several seconds 

window with caption “Serial port baud rate XXXXXX was successfully 
determined” will appear (see Fig.4.5) and determined baud rate will appear 
in the «

Test Options

» window.  

Содержание MRU-B

























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды