inergy Flex 1500, Руководство пользователя

Страница: 47 / 55

46
Flex system. If this happens, disconnect
your solar panels using the process
described in
Charging with Solar
Panels and simply reset the breaker by
allowing it to cool for several minutes,
then push it back into place. Before
reconnecting your solar panels, you
must make sure the open circuit voltage
of your solar panel array does not
exceed the specified limits (located in
this manual and on the unit itself). If
you need any help making sure your
solar panels are wired correctly, please
call us (See Contact Us .) We would be
happy to assist you.
Can I connect lead acid or AGM
batteries to the Flex?
No. ONLY genuine Flex Batteries
supplied by Inergy should be connected
to the Flex. No third-party batteries are
currently supported.
My solar panels are connected
correctly, but my Flex system’s
LCD display does not show a
charge coming in. Why?
The Flex DC and Flex 1500 Power
Consoles are equipped with a resettable
circuit breaker on the MPPT Charge
Controller to prevent damage. In the
event that open circuit voltages are
exceeded, this breaker will pop and turn
off the charge controller to protect the
FREQUENTLY ASKED QUESTIONS