inergy Flex 1500, Руководство пользователя

Страница: 25 / 55

common to all electronic devices. If
run times are shorter than you expect,
this is probably why. As a general rule,
higher power output usually results in
lower system efficiency.
Another key fact is that the DC outputs
are much more efficient than the AC.
For instance, it’s better to charge your
laptop and other mobile devices from
the DC ports than plug a wall charger
into the AC outputs. The Flex inverter
consumes a few watts of power even
with no load.
24
If you have any questions about your
Flex Modular System or the above
instructions, please contact us.
Getting the Most out of Your Flex
system
When using the Flex to power your
gear, pay attention to the LCD displays.
If you are using appliances that draw a
lot of power, like a space heater or heat
gun, the state of charge can decrease
rapidly, and you may not be able to use
the full system capacity.
There will inevitably be some energy
loss between the battery and the
outputs, which means you may not be
able to use the full storage capacity
with heavy loads. This energy loss is
non-combustible surface for at least 48
hours, and call us immediately.
Although it is very unlikely, there is
always a small risk of lithium batteries
catching fire. If you do experience a
lithium battery fire, douse it with copious
amounts of water until extinguished,
then remove anything flammable from
the vicinity of the battery. Do not attempt
to touch or move the battery as it can
reignite, putting you in danger.
If you cannot douse the fire with water,
allow the fire to burn out on its own in a
controlled and safe manner, away from
anything flammable. Allow the device to
remain on a non-combustible surface
for at least 48 hours, as lithium batteries
can potentially reignite.
USING YOUR NEW FLEX MODULAR SYSTEM