Introduction
Page 4 of 15
SCR808 | EN
In this manual you find the instructions to install and configure your IP-reader. This manual is meant for
all the Inepro IP-readers.
This manual, the IP reader hardware and software are subject to change, make sure you have the latest
version of this manual, because the older versions may have become obsolete.
Function
The purpose of the IP reader is to read the unique ID contained in the card that is presented to the
reader and transfer this ID to a server. In most cases this data will be the card serial number. To facilitate
this a variety of card reader software module have been developed. Our configuration tool will enable
you to change the setting on the IP reader board.
