INELCO GRINDERS A/S AutoGrind
Inelco Grinders A/S, Industrivej 3, DK-9690 Fjerritslev, Denmark 8/8
E-mail: [email protected] , www.inelco-grinders.com
10.
Maintenance
The AutoGrind module and control box are maintenance free, but needs to be kept dry and clean.
The rotating part in the AutoGrind module is running in two bearings. If dirt and moisture is getting in to
the bearings, they will not last so long, and it will affect the grinding result.
When the two bearings are worn out, they need to be changed, please contact the distributor where you
purchased the AutoGrind or contact Inelco Grinders.
11.
Technical data
The control box is universal and can be plugged in to all one phase power supplies from 100 V to 240 V for
both 50 Hz and 60 Hz.
The grinding module has a 12V motor, that may only be connected to the control box.
12.
Spare parts overview Item No. 75550005
Pos.
Item No.
Description
1
75550013
Blocking module for
AutoGrind
2
44550000
Bottom grinding module
AutoGrind
3
75550012
Axle module AutoGrind
4
75550011
Motor module for
AutoGrind
5
40310306
Allen screw M3x6
6
44550001
Top grinding module
AutoGrind
7
40310320
Allen screw M3x20
8
44550002
Motorcap
9
44550020
Bearing AutoGrind
10
17110035
On/off button AutoGrind
11
44551300
Packing box AutoGrind
12
40110511
Screw M4x12
13
44550017
Teflon disc
14
44550021
Motor Bearing
AutoGrind
15
74491429
Plug Foil Key female
16
75550010
Control cable
1
2
3
4
5
8
7
9
10
12
11
6
16
13
14
15
