4 .
If electrolyte gets into your eyes, rinse them
out with clear water and seek medical atten-
tion right away. It may result in loss of your
eyesight.
5 .
Do not short the battery cartridge:
( 1)
Do not touch the terminals with any con-
ductive material.
( 2)
A void storing battery cartridge in a con-
tainer with other metal obj ects such as
nails, coins, etc.
( 3)
Do not ex pose battery cartridge to water
or rain.
A battery short can cause a large current
breakdown.
6 .
Do not store the tool and battery cartridge in
locations where the temperature may reach or
ex ceed 5 0 ° C ( 122 ° F) .
7 .
Do not incinerate the battery cartridge even if
it is severely damaged or is completely worn
8 .
Be careful not to drop or strike battery.
9 .
Do not use a damaged battery.
10 .
The contained lithium-ion batteries are subj ect
to the Dangerous G oods Legislation req uire-
ments.
F or commercial transports e.g. by third parties,
forwarding agents, special requirement on pack-
aging and labeling must be observed.
F or preparation of the item being shipped, consult-
ing an ex pert for hazardous material is required.
P lease also observe possibly more detailed
national regulations.
Tape or mask off open contacts and pack up the
battery in such a manner that it cannot move
around in the packaging.
11.
Follow your local regulations relating to dis-
posal of battery.
SA V E TH ESE INSTRU C TIONS.
CAUTION:
Only use genuine
ING C O
battteries.
U se of non-genuine
batt eries, or batteries that
have been altered, may result in the battery bursting
IN GC O
Tips for maintaining max imum
battery life
1.
C harge the battery cartridge before completely
discharged. A lways stop tool operation and
charge the battery cartridge when you notice
less tool power.
2.
Never recharge a fully charged battery car-
tridge. Overcharging shortens the battery
service life.
3.
1.
B utton
2.
B attery cartridge
To remove the battery cartridge, slide it from the tool
while sliding the button on the front of the cartridge.
To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Insert it all the way until it locks in place
with a little click.
and result in damage to the tool and battery cartridge
and a personal injury.
cartridge.
F ailure to hold the tool and the battery
C harge the battery cartridge with room tem-
perature at 10 ° C - 4 0 ° C ( 5 0 ° F - 10 4 ° F) . Let
a hot battery cartridge cool down before
charging it.
4 .
C harge the battery cartridge if you do not use
it for a long period ( more than six months) .
also void the I N GCO warranty for the I N GCO tool and
charger.
CAUTION:
$OZD\VLQVWDOOWKHEDWWHU\FDUWULGJH
IXOO\XQWLOWKHUHGLQGLFDWRUFDQQRWEHVHHQ
I f not,
it may accid entally fall out of the tool, causing inj ury to
you or someone around you.
CAUTION:
'RQRWLQVWDOOWKHEDWWHU\FDUWULGJH
IRUFLEO\
I f the cartrid ge d oes not slid e in easily, it is
not b eing inserted correctly.
CAUTION:
$OZD\VVZLWFKRIIWKHWRROEHIRUH
LQVWDOOLQJRUUHPRYLQJRIWKHEDWWHU\FDUWULGJH
CAUTION:
+ROGWKHWRRODQGWKHEDWWHU\FDU
)81&7,21$/
'(6&5,37,21
CAUTION:
$OZD\VEHVXUHWKDWWKHWRROLV
VZLWFKHGRIIDQGWKHEDWWHU\FDUWULGJHLVUHPRYHG
EHIRUHDGMXVWLQJRUFKHFNLQJIXQFWLRQRQWKHWRRO
,QVWDOOLQJRUUHPRYLQJEDWWHU\
FDUWULGJH
_(QJOLVK
2
1
