A SSEM BLY
CAUTION:
A lways be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
Selecting correct impact socket
Always use the correct size impact socket for bolts and
nuts. An incorrect size impact socket will result in inac-
curate and inconsistent fastening torque and/or damage
to the bolt or nut.
Installing or removing impact socket
CAUTION:
M ake sure that the impact socket
and the mounting portion are not damaged before
installing the impact socket.
CAUTION:
A fter inserting the impact socket,
do not use it.
►
1.
Impact socket
2.
Square drive
Align the hole in the side of the impact socket with the
detent pin on the square drive and push the impact
socket onto the square drive until it locks into place. Tap
it lightly if required.
To remove the impact socket, simply pull it off.
Installing hook
►
1.
Groove
2.
Hook
3 .
Screw
The hook is convenient for temporarily hanging the tool.
This can be installed on either side of the tool. To install
the hook, insert it into a groove in the tool housing on
either side and then secure it with a screw. To remove,
loosen the screw and then take it out.
OP ERA TION
CAUTION:
A lways insert the battery cartridge
all the way until it locks in place.
If you can see the
red indicator on the upper side of the button, it is not
locked completely. Insert it fully until the red indicator
cannot be seen. If not, it may accidentally fall out of the
tool, causing injury to you or someone around you.
the bolt or nut. Turn the tool on and fasten for the proper
fastening time.
1
2
_(QJOLVK
3
2
1
