65
Using Upgrade Cards
Upgrade cards can be used to add the instrument functionality needed for LENS Wireless. Simply touch the
card to the front of the instrument. Then, follow the on-screen instructions and look for one of these results.
The upgrade was successful. Power off
the instrument, then power it on. The
feature-related symbol should now
appear on the display screen; otherwise,
see a supervisor.
The upgrade was not successful
because the card's upgrades have all
been used. Retry the upgrade with
another card.
The instrument is equipped with the
functionality.
The instrument's related
settings should be reviewed to ensure
they are correct (e.g., LENS is set to
"on").
Using an iNet Now connected instrument
If the instrument in use is set to send data to iNet Now, periodically check the instrument's status bar for the
cloud status symbol. If none appears or if the cloud is shown with a line through it, see a supervisor.
User-site Assignments
iAssign™ tags can be used to change the instrument’s user-site assignments. Each tag can contain a user
name, site name, or both.
Note:
An instrument’s settings may or may not permit the use of iAssign technology.
iAssign tag
iAssign tap
area
Results (success and failure shown)
To assign the instrument to the user-site data that is on an
iAssign tag, touch the tag once to the instrument’s iAssign tap
area.
To remove the assignment, use any one of these options:
Touch the same tag to the instrument’s iAssign tap area.
Touch a different tag to the instrument’s iAssign tap area.
Power off the instrument.
Dock the instrument to synchronize instrument settings
with their current values from iNet Control, DSSAC, or
Accessory Software.
Watch and listen for success or failure indicators.
Success
blue lights
current user and site
Failure
red lights
“Invalid Tag” message
If the assignment failed, retry the assignment.
Figure 5.4 Using iAssign tags