64
Zero and calibration
utilities
Bump test utility
Peak readings
TWA readings
Skip the
utility
Start the
utility
Skip the
utility
Start the utility
Do not clear
readings
Clear readings
Do not clear
readings
Clear
readings
STEL readings
Gas information
Home
—
—
Do not
clear
readings
Clear
readings
Next
display
screen
Next display
screen
Figure 5.3 Operation instruction
Wearing the Instrument
The instrument may be worn with its factory-installed clip, which is solely intended for attachment to a
garment.
As shown below, the clip should be securely fastened and attached in a manner that ensures the
instrument's sensor ports are fully exposed to the air. No part of the instrument should be covered by any
garment, part of a garment, or other item that would restrict the flow of air to the sensors or impair the
operator's access to the audible, visual, or vibration alarms.
Suspender clip
—
Lift the clip cover.
Position the garment between the clip's upper and lower teeth.
Press down on the clip cover to secure the clip in place.