Guards must be fastened in place before starting the compressor
and never removed before cutting off and locking out the main
power supply.
Excessive speed of the compressor or driver can be lethal.
Never operate the compressor beyond the manufacturer’s
recommendation. Bursting of the flywheel may be the greatest
threat because the normal guard may not contain all the pieces.
Crankshaft and connecting rod breakage is a possibility and
compressor efficiency, valve life and bearing life will be
abnormally reduced.
Removal or painting over safety labels will result in uninformed conditions. This
may result in personal injury or property damage. Warnings signs and labels shall
be provided with enough light to read, conspicuously located and maintained for
legibility. Do not remove any warning, caution, or instructional material attached!
Provisions should be made to have the instruction manual readily available to the
operator and maintenance personnel. If for any reason any part of the manual be-
comes illegible or if the manual is lost, have it replaced immediately. The instruction
manual should be periodically read to refresh one’s memory, it may prevent a seri-
ous or fatal accident.
!
CAUTION
!
CAUTION
GUARDS
All mechanical action or motion is hazardous in varying degrees and needs to be guarded. Guarding shall
be in compliance with OSHA Safety and Health Standards 29 CFR 1910.219 in OSHA manual 2206 and any
state or local code.
DRIVES
It is important that the compressor and motor pulleys are aligned properly and the V belt is correctly ten-
sioned. Improper pulley alignment and belt tension are causes for motor overloading, excessive vibration,
and premature belt and/or bearing failure.
Industrial Gold Air Compressors
|
800-531-9656
| www.industrialgold.com
7.5, 10, 15 HP Electric Reciprocating Compressor
