Indunium 2i User Guide
46 / 77
4.2.3
Answering a CSD Connection
1.
To answer a call manually, when the Indunium-R Modem Configurator displays the RING response,
type to answer a call manually, when the Indunium-R Modem Configurator displays the RING response,
type ATA , enable Enter and click Send.
2.
After the CSD connection has been established, and the modem will be in the data mode. At this point
you can proceed with data communication.
3.
To answer a call automatically, type ATS0=x and click Send, and then type AT&W and click Send in
the Modem Configurator. In this case, replace x with the number of rings that the modem receive
before answering the call.
Note:
1.
ATA is the Answer command. ATS0=<x> is the auto-answer command. The AT&W command helps
to save the current settings to the modem.
2.
It is much easier to activate Auto-answer using Modem Configurator. Input the number of rings to wait
in the input box and then click Rings Auto-answer.
