Indunium 2i User Guide
39 / 77
3.2.16
Debug (Only Available under “Normal Mode”)
In this tab, user could change serial port baud rate in Normal Mode. Please operate according to follow
steps to change baud rage (default baud rate is 115200 bps, in this case we want to change baud rate to
19200 bps):
1.
Select 19200 bps, then click “Change Baudrate to”, after that Current Baud Rate will also auto
change to 19200 bps (it will auto display “AT+IPR=19200” and “OK” in Receive windows);
2.
Test AT commands. Here we send “AT” then modem will reply “OK”.
Note:
1.
Please disconnect the COM connection, after that switch from Config Mode to Normal Mode, and
then and then connect again to the COM.
2.
Receive windows is a simple Hyper Terminal Emulator.
