Indu-Sol PROmesh P9+, Руководство пользователя, Страница: 21 / 49

Web application
PROmesh P9+
– User Manual
21
Figure 10: Quality value
Information bar chart
3 values are displayed per bar.
The grey part of each bar shows its maximum value. The lesser coloured part, bordered by a black line,
shows the current quality value. The colour-saturated part, which is bordered by a line with 2 arrows, shows
the worst quality value of the connection so far. Colouring of the bars is based on this, which is done in
accordance with the traffic light colour principle with green-yellow-red:

Green: The line quality is in order; no measures required.

Yellow. The defined threshold value of 30% was not reached. The line quality is not sufficient.
The connection should be checked at the next maintenance interval.

Red: No more data exchange can take place. Check the plug contacts and the data line.
A cable designation can be stored for each port in the port configuration menu. This can be displayed with
a “mouse-over” (moving the mouse pointer over the port).
Miscellaneous
The threshold value that turns the bar yellow and recommends checking the connection, can be adjusted
by the user. It is not recommended to set the threshold value below 30%. The alarms menu can be used
to define alarms for the line quality value, which send messages via relay, SNMP, PROFINET, or email
when a threshold value is undershot.