Indu-Sol PROmesh P9+, Руководство пользователя, Страница: 18 / 49

Web application
PROmesh P9+
– User Manual
18
There is no communication at the respective port. Either no device is
connected (potentially also at line interruption) or no telegram traffic can be
detected (serious fault in the network) or the devices no longer communicate.
3.4 Start
Successful login will lead to the main overview with the information bar, where the device name, the
installation location, and the IP address are displayed. The current user is displayed under the logout button
at the right end of the bar. You can log out by pushing the button. The help button displays notes and
explanations for the individual pages.
The port statistics provide an overall view of the state of the existing ports since the switch was started or
reset (history) and within the last minute (current). You can choose between two views. In the Overview
view:

Current partners

Transmission speed

Diagnostic messages
are displayed. In the Details view, the parameters of the overview and:

Mains load per s

Discards

Errors

Line quality value
are displayed.
The number of messages that have occurred is displayed in the message window. Clicking on the alarm
bell will automatically call up the entries in the message list. The messages as well as the counter status of
the ports can be deleted with the corresponding buttons.
The leakage current overview shows the current value between the RJ45 ports and the device
’s top-hat
rail. It is possible to switch between the display of the peak value (peak) and the effective value (RMS) or
this. This information makes interference currents visible at an early stage, which can lead to direct
communication disturbances.
The top-hat rail must have been grounded properly in order to measure the leakage current
correctly.
Selection in the menu bar allows you to call up the individual pages and make settings there. The displayed
menu items are subdivided into further subitems.