Indu-Sol PROmesh P20 Скачать руководство пользователя страница 49

Страница: 49 / 54

Web application

PROmesh P20 - User Manual

3.10.4 DNS setting

The main purpose of the domain name system (DNS) is answering queries for resolving the name. This

works like a telephone enquiry. The user only knows the domain name. The DNS server supplies the

associated IP address that is needed to go to the website. When receivers for e-mail alarms are configured,

an SMTP server has to be saved. If it is not entered as IP address, a DNS server has to be entered so that

the SMTP server can be correctly resolved.

In this menu, you can enter a DNS server. You can enter a secondary SMTP server for security purposes.

3.10.5 NTP setting

In this menu, you can configure the device time of the

PROmesh P20

, which is also available in the

Device

Time

field. If necessary, you can synchronize this with the time of the PC on which you have opened the

web interface.

It is also possible to configure the device time by means of an NTP server. For this, the following steps are

required:



Activate the time synchronizations by means of the NTP server.



Select the time zone where you are.



Enter an interval at which the time of the switch is regularly updated with the NTP server.



Enter the NTP server of your network.

3.11 System maintenance

3.11.1 Configuration file management

The Configuration File Management menu is divided into two additional menus.

The

Global Config

contains a list of all configurations made. These can be saved in the

Configuration File Management

on the SD card. It is also possible to load existing configurations from the SD card and applying it for the

switch.

Here you can also perform firmware updates or save the current firmware. Please use only a firmware

version that you have received from Indu-Sol and that was developed specifically for the PROmesh

switches.

Preparation:

It is recommended to carry out the update only when the MRP protocol is deactivated. In this case, open

the MRP ring first of all by pulling one of the cables and then deactivating the Media Redundancy Protocol.

Afterwards, carry out the firmware update.

Содержание PROmesh P20























































Результаты поиска

Содержание PROmesh P20

Отзывы:

Похожие инструкции для PROmesh P20

Бренды по названию

Популярные бренды

Indu-Sol PROmesh P20, Руководство пользователя

Результаты поиска

Содержание PROmesh P20

Отзывы:

Похожие инструкции для PROmesh P20

Бренды по названию

Популярные бренды