Indu-Sol PROmesh P20, Руководство пользователя

Страница: 25 / 54

Web application
PROmesh P20 - User Manual 25
Automatic
Activate the DHCP client function to receive a configuration of the IP address, the subnet mask and the
standard gateway from a server operating in the network with appropriate functionality.
Once you have saved the settings by clicking on the Apply button, the device will send a query into the
network and accept the configuration received from the DHCP server.
Since the device has now received a new IP address, it can no longer be reached via the standard IP.
Please contact your network administrator, if necessary, or use the Indu-Sol ServiceTool to get a new IP
address.
Manual
In case your network does not feature a DHCP or BootP server or the setting should be made manually,
then select the manual IP configuration in the upper area of the page.
Please check carefully which settings you make so that there are no problems with double IP addresses
that can negatively influence your entire network. The format of the IP address, the subnet mask and the
gateway has to be entered with decimal points. The following settings are necessary:

IPv4 address: Please note that the IP address set by you has to be reached from your PC so that
you can connect with the device again so that further settings can be made. Next to the IP address,
please enter the associated subnet mask. This divides the IP address into a network section and
a device section. This specifies which IP address of the device can be reached directly and which
addresses need to be addressed via a gateway.

Gateway: Enter a standard gateway. This gateway is used to communicate with devices outside of
your subnetwork.
Figure 10: IP Configuration
3.5.3 User settings
On the Password page, the preset default password for the Admin user can be changed (see Figure ). To
do this, the user must know the current password and has to enter it to confirm the change.
The following form boxes are available: