Indramat TVD 1.3, Руководство по применению

Страница: 4 / 72

4
• DOK-POWER*-TVD*1.3****-ANW1-EN-E1,44 • 02.97
Table of Contents
3.20. Heat loss inside the control cabinet ...............................................33
3.21. Safety clearance inside the control cabinet ...................................33
3.22. Front view of the TVD 1.3 ..............................................................34
4. TVD 1.3 Interconnections 35
4.1. Optional Control Possibilities ......................................................... 35
4.2. TVD interconnect with DC bus dynamic braking ...........................36
4.3. TVD interconnect with E-stop relay with DC bus
dynamic braking ............................................................................. 38
4.4. TVD interconnect without DC bus dynamic braking ...................... 40
4.5. TVD interconnect for a position-controlled braking of the drives ... 42
5. Terminal Descriptions 44
5.1. DC bus short-circuiting ................................................................... 44
5.2. Power off ........................................................................................44
5.3. Power on ........................................................................................44
5.4. Stopping the drives in an E-stop or a power failure ....................... 45
5.5. Signal Voltages ..............................................................................46
5.6. "Ready" status ................................................................................46
5.7. Power OK .......................................................................................48
5.8. Regenerated power too high .......................................................... 48
5.9. Temperature Pre-Warning ..............................................................49
5.10. Mains contactor de-energized ........................................................ 49
5.11. Mains contactor energized .............................................................49
6. Troubleshooting 50
6.1. Localizing the fault .........................................................................50
6.2. Diagnostic display .......................................................................... 53
6.3. Definition of the displays ................................................................54
6.4. Rating plate data ............................................................................ 57
7. Dimensional data 58
7.1. Dimension sheet TDV 1.3 power supply mdule .............................58