Version 1.0 Copyright by Indoorcycling Group GmbH 2009
|
www.indoorcycling.com
ENG 15
3
Zoom
6x B
6x D
5mm Key
4x self adhesive
rubber pads
rubber
pads
3: Attach center fin and rubber feet
Place the large center fin over the bolt holes in the wave stand, and secure using six
M5 bolts with washers. Affix the four adhesive rubber pads to the base of the wave
stand as shown in the illustration.
4: Move the MyRide into position
With at least two people, pick the MyRide up and move to its proper location. Use a
firm grip; do not slide or tilt the stand, as the weight of the unit may bend the metal
frame.
ASSEMBLY - free standing
ENG
h
MyRide V3.0