Indian Motorcycle Indian Challenger 2020, Руководство пользователя

Страница: 37 / 178

SSPPEEEEDDOOM MEETTEERR
The speedometer displays forward vehicle speed in either miles
per hour or kilometers per hour.
TTAACCHHOOM MEETTEERR
The tachometer displays engine speed in revolutions per minute
(RPM). A red line on the face of the gauge indicates the maximum
safe engine speed.
Excessive engine speed can cause engine damage or failure,
which could result in serious injury or death. Do not allow engine
speed to exceed the red line.
FFUUEELL GGAAUUGGEE DDIISSPPLLAAYY
The fuel gauge displays fuel level. For the most accurate reading,
sit on the motorcycle and bring it to the upright position.
The segments of the fuel gauge show the level of fuel in the fuel
tank. When the last segment clears, a low fuel warning is activated.
All segments including the fuel icon will flash. Refuel promptly.
RREEAARR CCYYLLIINNDDEERR DDEEAACCTTIIVVAATTIIOONN ((IIFF EEQQUUIIPPPPEEDD))
Designed as an aid to reduce engine and exhaust heat to the rider,
Rear Cylinder Deactivation turns off the rear cylinder when the
engine gets hot.
The following condition must be met for Rear Cylinder
Deactivation to be enabled.
• Engine must be up to operating temperature
• Ambient Temperature must exceed 15°C (59°F)
• Engine speed must remain below 1000 rpm
• Gear position must be 1, 2, or N
• Throttle must be in the closed position (0% throttle)
Cylinder Deactivation can be turned off by accessing the settings
menu in the drop-down from the top of the screen. Cylinder
Deactivation controls are in the Vehicle menu. When Rear Cylinder
Deactivation is functioning, an icon will illuminate at the top of the
Ride Command display screen.
35
INSTRUMENTS, FEATURES AND CONTROLS