Index G200.2 Скачать руководство пользователя страница 27

Страница: 27 / 110

A110

- Clean filter screens on chip conveyor

Orientation

The chip conveyor is used for removal of swarf from the work area and is also a

reservoir for the cooling lubricant.

The cooling lubricant is filtered in the chip conveyor. For this purpose, various filters

and filter plates are built into the chip conveyor. These filters must be cleaned

regularly. In particular, make sure that the area around the cooling lubricant pump(s)

is always free of chips or dirt.

For all work in connection with operating materials, the information in

the data sheets of the respective manufacturers and the information

in the document Notes on Operating Materials must be observed.

The chip conveyor must not be operated without the filters and filter

plates provided by the manufacturer. Follow the manufacturer’s

documentation!

Example: Plug-in strainers ABC

Procedure

Caution

Cooling lubricant splashing out of the chip conveyor.
Skin irritation and damage to the eyes.

Wear personal protective equipment (e.g., safety gloves and

safety goggles).

Remove cover plates in the area of the cooling lubricant pump.

2. Remove and clean filter and plug-in plates.

3. Remove and clean magnetic filter plates (option).

4. Remove and clean pre-filters (option) on the cooling lubricant pump.

If the supply of cooling lubricant is insufficient, the filter basket

on the cooling lubricant pump must be cleaned.

Maintenance Summary - Care activities

Maintenance Instructions

G200.2

DIE078EN - 05.06.2019

Содержание G200.2















































































































Результаты поиска

Содержание G200.2

Отзывы:

Похожие инструкции для G200.2

Бренды по названию

Популярные бренды

Index G200.2, Инструкция по обслуживанию

Результаты поиска

Содержание G200.2

Отзывы:

Похожие инструкции для G200.2

Бренды по названию

Популярные бренды