Index Braille Everest-D Скачать руководство пользователя

Страница: 28 / 49

Index Braille Printer Company

Manual Index Everest-D

Version 4.32

Page 28

6.6

Test program.

Connect Everest to the Com1 and centronics port LPT1 to run the complete testing program.

Switch off Everest and open the sheet feeder.

Press 5 in the BRLED menu.

On the screen a new menu will appear:

1. Filename:

*.EVP (Extension is automatically created.)

2. Date:

Testing date.

3. Name:

Name of operator.

4. Serial no:

(Displayed on the back of the printer.)

5. Board no:

(Displayed on the mainboard & the manufacturing document.)

6. Printinghead no:

(Displayed on the lower part of printinghead front.)

Note!

No 1-3 must be edited in order to create the Everest protocol file *.EVP.

It is also possible to run the test without enter those lines, but no protocol will then be saved.
Press ENTER

On the screen you will now see : "

Press ITEM during power on.

Power up INDEX while pressing the ITEM key.

The program will automatically test position 1-7.

Test 1: Serial Port

OK/Fail

Test 2: RAM memory

Y/N

OK/Fail

Note! This test requires 20 seconds.

Test 3: Parameter EEPROM Y/N

OK/Fail

Note! This test requires 2 minutes.

Test 4: PROGRAM PROM Version and no.
Test 5: Speech PROM

Version and no.

Test 6: Table PROM

Version and no.

Test 7: Number of pages

For each test the program runs the activated function until you have confirmed with an
Y (yes) or N (No).
Test 8: Speech

Y/N

Printer speaks every 10th word in wordlist.

Test 9: Sentences

Y/N

Printer speaks all sentences according to software.

Test 10: Feeder motor

Y/N

(Sheet feeder motor is running).

Test 11: Fan motor

Y/N

(Fan is running. You can feel it blowing at the
bottom of the left hand leg).

Test 12: Paper motor

Y/N

(Paper feed motor is running, observe the rolls).

Test 13: Printing head

Y/N

(Printinghead moves).

Test 14: Keyboard

Y/N

(Press all keys and get the right speech feedback)

Close the sheet feeder!

Test 15: Paper indicator

Y/N

(Inserts paper automatically, Y finish sequence).

Test 16: Front cover indicator

Y/N

(Open the front panel get the message displayed).

Test 17: Centronics

Y/N

(Automatically confirmed with "OK" or "Fail").

Press any key to return to main menu.

Содержание Everest-D


















































Результаты поиска

Содержание Everest-D

Отзывы:

Похожие инструкции для Everest-D

Бренды по названию

Популярные бренды

Index Braille Everest-D, Руководство пользователя

Результаты поиска

Содержание Everest-D

Отзывы:

Похожие инструкции для Everest-D

Бренды по названию

Популярные бренды