9
GB
Personalisations
C
Setting the temperature
Turn the TEMPERATURE knob to set the wash temperature
(see Programme table on page 8)
.
The temperature can be lowered, or even set to a cold wash ( ).
Set the drying cycle
Turn the DRYING knob to set the desired drying type.
Two options are available:
A
- Based on time: From 40 minutes to 180.
B
- Based on the damp level of the dry clothes:
Iron
: slightly damp clothes, easy to iron.
Hanger
: dry clothes to put away.
Cupboard
: very dry clothes, recommended for towelling
and bathrobes.
A cooling stage is foreseen at the end of the drying cycle.
If your laundry load to wash and dry is exceptionally in excess
of the maximum load foreseen
(see table opposite)
, perform
the wash cycle, and when the programme is complete, divide up the garments and put part of them back in the
drum. Now follow the instructions provided for a
dry only
cycle. Repeat this procedure for the remainder of the load.
Dry only
Turn the PROGRAMME knob to one of the drying settings (7-8) depending on the type of fabric, then select the
desired drying type using the DRYING knob.
Important:
- A spin cycle is carried out during the drying if you have set a cotton programme and a level of
dryness (Cupboard
, Hanger
, Iron
).
- For cotton loads of less than 1 Kg, use the drying programme designed for delicate fabrics.
Functions
To enable a function:
1. press the button corresponding to the desired function, according to the table below;
2. the function is enabled when the corresponding button is illuminated.
Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the
programme set.
Function
Effect
C om m ents
Enabled with
programmes:
Delay Timer
Delays th e start
of the wash by
up to 9 hours.
Press th e button repeatedly until the L ED corresponding to th e
desired delay is turned on.
Th e fifth time the button is pressed, th e function will be disabled.
N.B .: Once you h ave pressed th e Start/R eset button, th e delay
can only be decreased if you wish to modify it.
A ll
Easy iron
Th is option
reduces th e
amoun t of
creasing on
fabrics, makin g
them easier to
iron .
W h en this fun ction is set, programmes 4, 6 w ill end with th e
laundry left to soak (An ti-crease) an d th e R inse cycle ph ase
L ED will flash .
- to conclude the cycle, press the STAR T/RESET button ;
- to run the drain in g cycle alon e, set the kn ob to the relative
symbol and press the STAR T/R ESET button .
3, 4, 6,
9, 10,
Rinse cycle.
Extra Rinse
In creases th e
efficiency of the
rinse.
R ecommended when th e applian ce has a full load or w ith large
quantities of detergent.
1, 2, 3, 4, 9,
10, 12, 13,
Rinse cycle.
1400-600
R edu ces th e
spin speed.
A ll
program m es
ex cept for 6
and d raining.
Fabric
type
Load type
Max.
load
(kg)
Cup-
board
Hanger
Iron
Cotton,
Linen
Clothing of different sizes
5
180
170
140
Cotton
Terry towels
5
180
170
140
Terital,
Cotton
Sheets, Shirts
2,5
140
120
100
Acrylics
Pyjamas, socks, etc.
1
70
65
60
Nylon
Slips, tights, stockings, etc.
1
70
65
60
Table of drying times
The data contained in the
table are purely indicative.
The machine has an intelligent built in check for out of balance loads. To let protect your machine it may reduce the final spin
speed if an unbalanced load is detected.
