23
GB
ON-OFF/DOOR LOCK led:
If this LED is on, the appliance door is locked to prevent it from being opened accidentally; to avoid any damages, wait for
the LED to flash before you open the appliance door (wait approximately 3 minutes).
!
The rapid flashing of the ON-OFF/DOOR LOCK Led together with the flashing of at least one other LED indicates there is an
abnormality.
Leds
The LEDS provide important information.
This is what they can tell you:
Delay set:
If the Delay Timer function has been enabled, once you
have started the programme, the LED corresponding to
the delay set will begin to flash:
As time passes, the remaining delay will be displayed,
and the corresponding LED will flash:
Once the set delay is complete, the flashing LED will turn
off and the programme set will start.
Cycle phase under way:
During the wash cycle, the LEDs gradually illuminate on to
indicate the cycle phase under way:
Prewash / Wash
Rinse
Spin cycle
Drying
Note:
- during draining, the LED corresponding to the Spin cycle
phase will be turned on.
- when the drying cycle is complete, the indicator light relati-
ve to phase
will flash, to indicate that the DRYING knob
needs to be set back to the
0
setting.
Function buttons
The FUNCTION BUTTONS also act like LEDS.
When a function is selected, the corresponding button is
illuminated.
If the function selected is incompatible with the programme
set, the button will flash and the function will not be enabled.
If you set a function that is incompatible with another function
you selected previously, only the last one selected will be
enabled.
