Indesit IHT6.5CMIX, Информация о сервисе

Страница: 21 / 25

21 of 25
Whirlpool UK Appliances Ltd
Service Manual UK English
D) Control Switch Bank (incuding Cables)
1. Remove the grease filters as in (A).
2. Remove the lamp assembly trim, two screws, Fig. 1.
3. Remove the two fixing screws along the front edge of the canopy, Fig. 6 and lower the bracket.
4. To remove the switch bank from the bracket, release the two screws that secure it to the bracket,
Fig. 7.
5. Release the cover by removing the four screws circled in Fig. 8. On reassembly ensure no wires
are trapped under the cover.
6. Unclip the button trim by pressing on the 4 securing tabs, Fig. 9.
7. Disconnect the power supply cable (if required) to the switch bank by releasing the 2 screws
circled, Fig. 10.
8. Disconnect the wiring to the lamps.
Fig. 6 Fig. 7
Fig. 8
Fig. 10
Fig. 9