15. Structure of the parachute - description of packing loops
On the NG series, packing loops of different lengths are attached to the top to enable easy packing. They are green at the
corners, yellow at the sides, and the packing loop of the centre line is white.
The overview drawings below show where the packing loops are located (required for 16. packing instructions, step 1).
16. Packing instructions
1. Put on all packing loops with a cord and hang them up.
The number and position of the packing loops can be seen
in 15.
2. Attach the packing loop cord, tighten the lines, bundle
the lines and lay all the panels on the left side so that
panel 11 lies as shown in the illustration.
3. Place panel 11 centred on the floor, pull panel 10 out to
the side, as well as the upper part (blue arrow).
4. Arrange panel 9 to 7. Pull the upper and lower part of the
panel out to the side so that the panel forms a rectangle.
5. Arrange panel 6 (corner panel). Pull out the upper part of
the canopy (blue arrow).
6. Arrange panel 5 (corner panel). Pull out the upper cap
part (blue arrow). Then arrange panels 4 to 2 as described
under number 4.
7. Arrange panel 1 (corner panel) and weigh down the hem
with a weight.
8. Put the left side on top of the right side.
1
2
3
4
5
6
6
5
4
3
2
10
9
8
7
7
8
9
10
1
1
11
5
6
1
1
11
6
7
