Indel B TB118 DD Steel, Инструкция по эксплуатации

Страница: 27 / 108

25
E
N
G
LI
S
H
TEMPERATURE CONTROLLER
The electronic Temperature Controller provides the ability to set the desired temperature level and
displays information on the cabinet and set temperature.
The electronic controller has been programmed to maintain an average of the set temperature. The
compressor will start up when the internal cabinet temperature increases 0.5 to 1.5 degrees above
that selected and will run until the temperature is 0.5 to 1.5 degrees below the set temperature.
When your appliance is first connected to AC or DC input the digital read out will show the current
cabinet temperature - the temperature shown on the ‘LEFT ZONE TEMP’ display corresponds to
the larger Left Zone cabinet; the temperature on the ‘RIGHT ZONE TEMP’ display corresponds to
the stepped Right Zone cabinet.
To adjust the temperature follow these steps:
To increase the cabinet temperature press
and to decrease press until the desired level
is reached.
Once selected the display will flash a number of times before returning to the current temperature.
When press the above two buttons Set (compressor speed) and
(cooling) at the same time, it
would switch the display between °C and °F.
LEFT ZONE RIGHT
ZONE
COOLING
LEFT BIN RIGHT BIN
BATTERY PROTECTION
HIGH
MID
LOW
SET
COMPRESSOR SPEED
MAX
MIN
SET
ON
OFF
COOLING