1.0 - GENERAL INFORMATION AND WARNINGS
Carefully read this manual before operating the device.
Prior to initiating operation it is important to carefully follow the instructions contained in this manual.
The manufacturer declines all responsibility in case of damage or injury to objects or people caused by operation or variations
which are not compliant with the device.
Installing and using
“CUBE”
can be performed by anyone who has minimum DIY skill; however, when in doubt, please contact the INDEL B
assistance staff or an authorised workshop.
Every time
“CUBE”
is moved from one vehicle to another, pay attention to the power supply and to electrical absorption. Pay
attention to the section addressing technical features.
Use
“CUBE”
exclusively for the use intended by the manufacturer and do not perform modifications or changes to the device.
INDEL-B will
not
acknowledge warranty on devices which have been changed or modified.
The device is not designed to operate in potentially explosive environments.
The device is not designed to operate in saline environments.
Indications referring to
RIGHT
and
LEFT
, are relative to the vehicle’s driver looking towards the direction of motions.
BEFORE PERFORMING ANY INSTALLATION OR MAINTENANCE OPERATIONS ON
“CUBE”
, DISCONNECT ALL CONNECTIONS TO
THE VEHICLE’S BATTERY AND TO ALL OTHER POWER SOURCES.
If the electrical cables have to go through bulkheads with sharp corners, use protective sheaths or piping.
Firmly secure the electrical cables paying close attention to their path along metal bulkheads able to conduct electricity; furthermore, avoid
contact with sharp edges.
Connect
“CUBE”
to the vehicle’s power supply protecting the system by using a fuse.
Do not insert hands in the ventilation vents and do not place any foreign object into the device.
“CUBE”
weighs 19.5 kg. Take all necessary precautions during handling, installation or use in order to avoid falls, damage or injury.
When the vehicle is moving
“CUBE”
must be secure:
by means of the anchoring system with vehicle’s seat belt (if placed on the seat),
with the supplied belt or in any other safe manner is placed in other positions.
When
“CUBE”
is placed on a seat it must necessarily be secured (also when the vehicle is not moving:
by means of the anchoring
system with vehicle’s seat belt (if placed on the seat), with the supplied belt or in any other safe manner.
When the cabin is overturned
“CUBE”
must necessarily be secured:
by means of the anchoring system with vehicle’s seat belt (if placed
on the seat), with the supplied belt or in any other safe manner is placed in other positions.
When the vehicle is being washed, remove the components of
“CUBE”
secured to the window, to the trap door or in other positions
which might allow large amounts of water to enter.
Dispose of packaging material as required by standing regulations, separating them for recycling.
Replacement parts can be ordered at the INDEL-B assistance service.
E
N
GL
ISH
23
Содержание SW CUBE 12V
Страница 2: ......
