Indel B RM7, Инструкция по эксплуатации

Страница: 31 / 76

E
N
G
LI
S
H
29
MAINTENANCE
Warning
Before carrying out any maintenance on the device, disconnect the power supply.
Warning
It is advisable to have the maintenance work described below carried out regularly, by qualified
and authorised personnel only.
CLEANING
Respect the following cleaning operations for a correct maintenance of the device:
• Regularly clean the inside and outside of the device using only warm water and a non-abrasive,
neutral detergent. Remove any solid residues (dust, particles, etc.) with a vacuum cleaner.
• Rinse with clean water and dry thoroughly with a soft cloth.
• Avoid penetration of the detergent through gaps or openings in the device.
• Do not use: products specifically for glass and mirrors; liquid, powder or spray detergents;
solvents; alcohol; ammonia or abrasive products.
• When the device is not in use, it is advisable to dry the inside well and to leave the door
half-open to air the inside.
• After a long period of use, check that the ventilation grilles are not clogged with dust.
• The door seal must always be kept clean, in case of mould, and must be free from oil;
regularly check that there are no signs of ageing in order to avoid a poor seal.
USEFUL TIPS
In the event of failure or malfunction, before contacting our nearest service centre, ensure that:
•
the supply voltage is not disconnected.
• the voltage matches the indications on the plate.
• the connections and polarities are correct.
• the fuse on the power line is not blown.
Warning
The power cable must be replaced by qualified technical personnel and in any case by a service
centre authorised by the manufacturer.
Warning
The use of accessories and cables other than those supplied can cause an increase in
electromagnetic emissions or an increase in the electromagnetic immunity of the device.
Indel B disclaims all liability in the event of failure to strictly comply with all the provisions
contained in this manual.