PSA-BT-BP
Stationary Lift Stand
FEatuRES:
•Accomdates containers up to 48” diameter.
•Constructed from heavy gauge plate and square tubing, carbon
steel - painted.
•Capacity to hold up to 150 lbs.
•Air cylinder actuation - 48” travel. 10cfm @ 40 psi required.
OpERatiON:
•Height adjusts with a 3-position air control valve. This valve is
spring centered and rests in the center “off” position.
cautiON:
After the air line is installed and before operating this machine for
the first time, move the lift control valve to the downward position.
This will “charge” the air cylinder and prevent surging when the lift
control valve is moved to the upward position.
•Air Valve - Cylinder speed control adjustment:
INDCO, Inc. •
M-M-30130 Lift Stand -Air manual • 2/5/13 • Page 4 of 6
up “raise” position
center “off” position
down “lower” position
3-position
air control
valve
mixer mount
max. 98”
min. 50”
4”
7.75”
18”
extention
96.25”
overall
height
mixer
mount plate
& slide-tube
air
cylinder
3-position
control
valve
12” x 12” base
• 1/4” plate
FOUR - 9/16” x 1” slots
• 10” centers
PSA-DL &
PSA-DL-BP
mixer
mount plate
& slide-tube
Air flow adjusting screw:
close approx. 1/2-turn until
desired lowering speed is
obtained.
Air flow adjusting screw:
open approx. 1/2-turn until
desired lifting speed is ob
-
tained.
Once desired raise &
lowering speeds are
obtained, tighten locking
nuts.
lock-nut
lock-nut
joystick
