INSTALLATION, CONTINUED:
Impeller Shaft - BGF series
The impeller shaft mounts through the hollow gearbox shaft. Apply an “anti-seize” material in the hollow gearbox quill area.
Tighten set-screws securely.
OPERATION:
Electric Power:
Once the electric motor has been wired, check rotation to be sure the mixer shaft is rotating in a clock-wise direction, looking
downward into the container.
Air Power:
Check to ensure the air valve is in the closed position, then connect air supply. Check rotation to be sure the mixer shaft is
rotating in a clock-wise direction, looking downward into the container.
Once the mixer is in the container, it is now safe to operate. Always start and stop mixer in slowest speed.
CAUTION:
ü
Never run mixer without a propeller.
ü
Never run propeller outside a container.
INDCO, Inc. • M-M-30105 mixer manual BT & BGF Series • 1/9/14 • Page 5 of 11
gear box
impeller shaft
impeller
motor
set-screws
2 @ 90° apart
Rotation:
clock-wise looking
downward into
tank
Apply “anti-seize”
material in the
shaft ~ hollow quill
area.
