10
In the Process select the imported profile
Make sure that the imported .frm appears in the G-Code tab
The platform and nozzle of the head can be
heated up to 120ºC and 300ºC depending
on the printing material, therefore caution is
recommended.
Do not handle any mechanical parts of the printer
while it is in operation.
ATTENTION, HOT SURFACE
RISK OF ENTRAPMENT
Place the printer on a firm
surface without vibration.
Place the printer in a draft-free
environment with an ambient
temperature between 15ºC - 25ºC.
Follow the printer installation
and power-up instructions.
Use materials recommended
by Indart3D to ensure proper
printer operation.
Make your prints by following
the recommendations and
parameters given by Indart3D.
Follow the maintenance
recommendations for optimal
printer operation and durability.
Cleaning the head
Every 100h of printing.
Depending on the material it
would be advisable to do it more
regularly.
General cleaning and greasing
of the printer every 6 months is
recomended.
It is advisable to change the nozzle
periodically, every time you change
spools or material. Write us and we
will provide them to you.
Select the .fff file you want to import
It will show a message like this
