Incredible Technologies LoonyTIX Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 33

Incredible Technologies LoonyTIX Скачать руководство пользователя страница 20

VIDEMPTION CABINET

Quick Start Guide

©2014 Incredible Technologies, Inc. All Rights Reserved. Non-IT trademarks are the properties of their owners and used for illustration only. Unauthorized duplication or disclosure may violate applicable laws or agreements.

1

Mounting HDTV Monitor

2

Mounting Marquee

Installing Brackets and HDTV Monitor

Using the four M8 Mounting Plate Bolts, four Mounting Plate

Flat Washers and four Mounting Plate Lock Washers, attach
the two Mounting Brackets to the HDTV Monitor. See circles
in image at right for location of bolts.

Each Mounting Bracket has a hinge on the side that
attaches to a peg on the cabinet.

With a minimum of two people lift the

HDTV Monitor into position, aligning the
hinges on each side of the Mounting
Brackets with the pegs on the cabinet.

Using two 8-

32 x 3/8” Hex Screws,

secure the Mounting Bracket to the
mounting plate on each side of the
cabinet.

Unpacking and Installing the Marquee Topper

Carefully unpack the paper (do not snag LED wires) and remove the acrylic

artwork from the front of the Marquee Topper.

With a minimum of two people lift the Marquee Topper into position on top of

the cabinet and carefully slide it onto the pegs protruding from the Marquee
Mounting Brace. Attach one 8-

32 x 3/8” Hex Nut to each peg and turn until

tightened. On the back of the cabinet, attach one 8-

32 x 3/8” Hex Screw

through the Marquee Brace on each side. See images below.

Front

Back

Remove the clear plastic coating from the front of the acrylic artwork. Lift the

artwork into the pre-secured L-supports within the Marquee Topper.

See reverse side for peripheral installation information.

This Quick Start Guide is one of three guides IT uses to help operators better understand our videmption cabinets. For more
detailed installation instructions, visit

http://amusement.itsgames.com/service/manuals

and download the Install Guide. When

installation is complete use the Operator Menus Guide to change the settings in the menus.

If your videmption cabinet needs repair, or you have a technical question, call (847) 870-7027 x380 between 7 a.m. and 6
p.m. CST Monday through Friday, or email

[email protected]

. For after hours between 6 p.m. and 9 p.m. CST, M - F, or

toll free, please call (800) 262-0323.

To Purchase This Item, Please Visit : BMIGaming.com | Call Global Sales : + 561.391.7200 | USA / CA : (800) 746-2255

«
...
18
19
20
21
22
...
»

Содержание LoonyTIX


































Отзывы:

Нет отзывов