Syncro_View_AUS_v2.0.docx
Page 3 of 12
2.2
Mounting
Surface mounting units should be mounted on a dry, flat surface, at eye height to the display and in a level
position such that the enclosure is not distorted.
Screws or bolts of a minimum of 4mm diameter must be used to mount the enclosure in all three mounting
positions.
Suitable fixings should be used at all fixing points such that the unit is securely mounted and is not liable to
move once fixed.
Units should not be mounted in another enclosure or near sources of excessive heat.
Cables should be connected using suitable cable glands. If additional cable entry points are required, all swarf
and debris caused by drilling of additional cable entries must be cleared before power is applied.
