Syncro_View_AUS_v2.0.docx
Page 8 of 12
8
Processor and watchdog reset switches
The Syncro VIEW is controlled by a microprocessor, which will re-start itself and continue to run if it stops for
any reason due to severe electrical interference such as an electrical storm.
To ensure that the unit is not being subjected to continual, undue interference which may affect its proper
operation, a watchdog (W/DOG) LED indicator is latched on and a fault condition signalled to the control panel.
If a processor re-start has occurred. this latched fault condition will need to do a reset by pressing the W/DOG
RESET button on the bottom of the PCB.
A switch is also provided to manually re-start the processor PROC RESET. This switch can be used while the units
are connected to the system to ensure that the unit starts up and establishes communication with the panel in
a controlled and expected manner.
9
Connections to Syncro View
