Incite Fire HFC-SBR-23-03, Руководство пользователя

Страница: 5 / 11

OUTPUT TONE SETTING
Use the DIP switch on the back of the sounder body to select the tone required; for this function the first five switches are used, highlighted in
picture 8.
The switches positioned upwards acquire value “1”; on the other hand, if positioned downwards acquire value “0”.
1) From the → TONE SET table (table 4) select the output alarm tone triggered when the sounder is activated.
2) Refer to the corresponding line of the “DIP configuration” column to select the five switch selection settings.
OUTPUT VOLUME SETTING
Use the DIP switch at the back of the sounder body to select the output volume; in particular, switches 6 and 7, highlighted in picture 9, are
used.
The switches positioned upwards acquire value “1”; on the other hand, if positioned downwards acquire value “0”.
1) Select the alarm volume required when the sounder is activated (table 3).
2) Refer to the corresponding line of the “DIP configuration” column to set the two volume selection switches.
Picture 8
Picture 9
Tone volume DIP configuration - switch 6 and 7 dB(A) evaluation Notes
HIGH 11 100 dB(A) +/ - 3 All tones
MEDIUM HIGH 01
MEDIUM LOW 10
LOW 00
Table 3