inbody BPBIO250, Руководство пользователя

Страница: 27 / 56

27
∙ The current number of measurements / the total number of times and the standby time are
showed in date and time display field.
∙ For more information on how to set the number of measurements and standby time, refer to
“F. User Settings”.
∙ The measurement date and time can be checked in the MEMORY Mode.
Note
Standby Stop Watch
Current Measurement Count
Total Measurement Count
Blood Pressure
Measurement
Blood Pressure
Measurement
Blood Pressure
Measurement
Measurment
results on the
screen
After 60
seconds
After 60
seconds
<1st Measurement> <2nd Measurement> <3rd Measurement> <Total Results>
* CYCLE Mode
- In CYCLE mode, the patient can measure blood pressure repeatedly.
- The number of measurements and standby time can be set.
- If the measurement count is set to 3 times and the standby time is set to 60 seconds,
the operation in the CYCLE mode will be performed shown below.
<Measurement Order>
❶
Make sure that the Cuff is correctly worn and the posture is correct again.
❷
Set to CYCLE mode by pressing the [MODE] button.
❸
Press the [START/STOP] button to start the blood pressure measurement.
❹
When pressurization starts and the pressure reaches a certain extent, the measurement
begins while air is exhausting slowly.
❺
After measurment, the result is displayed and saved automatically.
❻
The current number of measurements is changed.
❼
After the standby time has elapsed, the next measurement starts.