Inax Regio DV-R115-VL-US, Руководство пользователя

Страница: 27 / 83

Operation
26 26
Auto Flush Function
● Set AUTO CLEAN to “ON”.
Flush delay setting When the user standing Full fl ushing versus partial fl ushing
When a user stands in front of the
toilet for 6 seconds or longer with the
seat opened, partial
fl ushing begins
1 second after the user leaves the
toilet.
(If the user closes the toilet seat
lid before leaving, the auto
fl ush
function will not operate.)
In AUTO CLEAN mode, full fl ushing is
performed when a user occupies the toilet
seat for 50 seconds or longer. Partial
fl ushing
is performed when the user occupies the
toilet seat for less than 50 seconds.
(If any of the washing functions are used,
full
fl ushing is performed even if the seat is
occupied less than 50 seconds.)
In AUTO CLEAN mode, fl ushing
begins approximately 6 seconds
after the user stands up. The
delay time can be changed
to approximately 2, 10, or 15
seconds. See page 43 for more
information on changing the
fl ush
delay setting.
STEP
5
To deactivate the auto fl ushing function
Set AUTO CLEAN to “OFF”.
[Note]
● In the event of a power failure, the toilet can be fl ushed manually. See page 49 for more information.
To fl ush the toilet using the remote control unit
Press the FLUSH/FULL button. The
toilet is flushed using 1.6 gallons (6 L).
If the user presses the FLUSH/
PARTIAL, the toilet is flushed using
1.1 gallons (4 L).
AUTO CLEAN
FLUSH/FULL
FLUSH/PARTIAL