Inalto IDO6013T, Руководство пользователя

Страница: 24 / 40

PAGE 24
cleaning
general
• It is important to clean the product
regularly as a build up of fat can af-
fect its performance or damage it and
may invalidate your guarantee.
• Always switch off your appliance
and allow it to cool down before you
clean any part of it.
•
products containing chlorides, wire
wool or abrasive cleaners on alu-
minium, stainless steel, or plastic/
painted parts as they can damage
the appliance. Nylon pads can also be
unsuitable.
• Take extra care when cleaning over
symbols on fascia panels. Excessive
cleaning can lead to the symbols
fading.
• If your product is fitted with stainless
steel cladded stips. You may notice
a small white residue on the outer
edges, this can be removed with a
non abrasive wipe.
painted & plastic parts
•
hot soapy water.
•
nylon cleaning pads on these parts.
stainless steel & aluminium surfaces
•
hot soapy water, and dry with a soft
cloth.
• Stubborn marks can be removed us-
ing a stainless steel cleaner. Supplies
can be purchased from the c ustomer
c are c entre.
• Sharp objects can mark the surface
of stainless steel, but will become
less noticeable with time.
• Wipe any spillage immediately, taking
care to avoid burning your hands
• Some foods are corrosive eg; vinegar,
fruit juices and especially salt - they
can mark or damage the metal if they
are left on the surface.
• Baby oil can be used to restore stain-
less steel finishes - but only use a
few drops. don’t use cooking oils
as they can contain salts, which will
damage the metal.
•
enamel surfaces & parts
•
clean cloth.
• If larger splashes of fat do not readily
disappear, you can use a mild cream
cleaner to remove them. More stub-
born marks can be removed using a
soap filled pad.
•
towel or cloth.
•
glass parts
WaRning:- o not use harsh
abrasive cleaners or sharp
metal scrapers to clean the
oven door glass since they can
scratch the surface, which may
result in shattering of the glass.
•
hot soapy water, or a specialist glass
cleaner.
r inse away any excess cleaner and dry
with a soft cloth.
chrome plated parts
• Use a moist soap fi led pad, or place
in a dishwasher
21
rinse well and dry with a soft clean
only use a clean cloth wrung out in
do not use undiluted bleaches,
only use a clean cloth wrung out in
do not use abrasive cleaners, wire or
only use a clean cloth wrung out in
do not use steam cleaners.
clean with warm, soapy water and a
do not use steam cleaners.
d
Cleaning and maintenance
rinse
filled