inada DREAMWAVE HCP-11001A, Руководство по эксплуатации

Страница: 24 / 95

22
M
A
N
U
A
L S
E
L
E
C
T
IO
N
M
O
D
E
How to Operate Manual Selection Mode
Changing Courses
Switching from Manual Selection Mode to a Preset Program
●
When one Preset Program button is pressed while Manual Selection Program is in progress, the selected preset program starts.
●
The roller returns to their storage positions and the new program starts after the Automatic Shiatsu Point Locator completes a
body scan. You can adjust the shoulder position during Automatic Shiatsu Point Locator. If a body scan was completed in the
manual mode, the Preset Program will commence without conducting a body scan.
●
After a total duration of 30 minutes, the course in progress stops even if not completed.
* It may take some time to change courses because the air bags for the BACK 3-D function must be deflated before changing the
course.
Stopping in the Middle of a Massage
To stop mid-massage, press the POWER button. The rollers will return to their storage positions, and the seat will automatically
return to the full upright position automatically.
In an emergency, or if there is any sudden malfunction, push the STOP button to make the chair stop immediately.
After confirming safety, press the POWER button. The rollers will return to their storage positions, and the seat will automatically
return to the full upright position automatically.
Caution
●
If you feel the massage is too strong, reduce the stimulation according to this Operating Manual. If this
solution does not work, stop using and contact your local distributor.
→
May result in injury if you continue use with high stimulation under such circumstances.
●
Do not place hands or feet into the roller tracks, into the space between the seat back and the seat or into
the moving parts. Do not sit wearing hard objects, such as hair accessories, necklace, watch, bracelet, or ring.
●
If your leg or foot comes out of the leg rest during the massage, do not try to force it back in.
❶
Press the POWER button.
If no selection is made within 2 minutes, the power is
automatically shut off.
❷
Press the desired button.
* Full Rolling, or Partial Rolling is selected, the Automatic
Shiatsu Point Locator starts locating Shiatsu points.
❸
Massage action starts.
The progress of the course is indicated on the display
of the remote control with the course name.
❹
After 15 minutes, the massage
operation finishes.
The rollers return to their storage positions (upper
part of seat back).
Then the power to the remote control is shut off.
However, reclining of the seat back, angle adjustment
of the leg rest, and ON/OFF of the heater are still
enabled.