OPERATING MANUAL
10 MOTOR MASSAGE MAT WITH HEAT
Please read all instructions before using model 60-2907P08.
Contents
Model 60-2907P08 Massaging Mat with home adapter
Getting started
1. Pull the non-elastic strap around mat back and fasten it to its supporter.
2. To use massage mat at home, connect the AC adapter output
(voltage: +12V 1A) male-plug with the female-plug on the back
of the mat. Then plug the AC adapter into a wall socket (voltage: 120V/60Hz).
AC Adaptor Connector Position
3. Lie comfortably on the mat and use the hand controller to select the desired functions.
Caution:
Be careful not to damage the mat with plastic fasteners during installation.
Heat
Press the "HEAT" button to turn the heat function on or off. A built-in thermostat is to
control the temperature within a safe range.
Note: This product uses a warming heat as shown. It is not intended to be used as a
therapeutic heating pad. Please allow a few minutes to reach maximum temperature.
Mat reaches maximum temperature of 140F after approx. 7 minutes.
Built-in Timer
The cushion has a built-in timer that deactivates the cushion after 15 minutes.
After 15 minutes of use please wait 15 minutes and simply turn cushion on again.
CONTROLLER
CUSHION
Massage
areas
Heat
Push to turn heat
on / off
Intensity selector
Mode indicator lights
(M1 - M5)
Mode selector -
choose from 5
pre-programmed
massage
modes
On / Off
Intensity indicator lights
(LO, MED, HI)
Push for Neck/
Upper back massage
Push for Mid-back
massage
Push for Lower Back/
Lumbar massgae
Push for Leg / Thigh
massage
Body zone
indicator lights
