background image

 

 

DAYS CORPORATION

 

LIMITED WARRANTY, REPLACEMENT PARTS & RETURNS POLICY 

 

 

 

 LIMITED  WARRANTY

  Effective  January  1,  2016  Days  Corporation  (“Days”)  warrants  to  the  original  purchaser  of  system 

components (the “Products”), for a period of three (3) years from the original sale date or date of dealer installation, whichever is earlier 
(“Limited Warranty Period”), that the Products shall be free from defects in material and workmanship. Days’ sole obligation under this 
warranty  is, at its  election,  to repair,  replace  or  make  appropriate  adjustments  concerning  the  Products  where  Days’ inspection discloses 
any such  defects  in the Products occurring in normal  usage within the limited warranty period. Days will, at its option, repair or replace 
such part at no expense to you (provided, however, that you will be responsible for all shipping or transportation costs in connection with 
transporting this unit to and from Days). Only warranty claims with prior authorization from Days will be recognized; all other claims are 
invalid  and  will  be  denied.  This  warranty  does  not  apply  to  abuse,  misuse,  neglect,  negligence,  error  of  operations  or  to  purposeful  or 
accidental damage or damage due to “act of God” such as wind or rain damage, flood, lightning or other natural or similar occurrences. The 
limited warranty coverage applies only to the Products and no other apparatus or property to which the Products are affixed or attached. 
The  limited  warranty  is  not  transferable.   

THE    FOREGOING  WARRANTY  IS  IN  LIEU  OF  AND  EXCLUDES  ALL  OTHER  WARRANTIES  NOT 

EXPRESSLY SET FORTH HEREIN

WHETHER EXPRESS OR IMPLIED BY  OPERATION  OF  LAW OR  OTHERWISE

AND  DAYS EXPRESSLY  EXCLUDES 

ANY  IMPLIED    WARRANTIES

INCLUDING    ANY    IMPLIED  WARRANTY  OF  MERCHANTABILITY  OR  FITNESS  FOR  PURPOSE  OR  USE

.  Days  is  not 

responsible  for  removal  or  installation  costs. 

UNDER  NO  CIRCUMSTANCES  SHALL  DAYS

’ 

LIABILITY  FOR  ANY  DEFECT  IN  THE  PRODUCTS

WHETHER  BASED  ON  CONTRACT

TORT

WARRANTY

STRICT  LIABILITY

OR  ANY  OTHER  THEORY

EXCEED  THE  PURCHASE  PRICE  OF  THE 

DEFECTIVE  PRODUCTS

AND  DAYS  SHALL  HAVE  NO  LIABILITY  FOR  CONSEQUENTIAL

SPECIAL

INCIDENTAL

INDIRECT

EXEMPLARY  OR 

PUNITIVE  DAMAGES  OF  ANY  KIND  WHATSOEVER

.  This limited warranty provides the limited purchaser of the Products with specific legal 

rights. The original purchaser of the Products may also have other rights that vary from state to state. 

 

APPLICABILITY  OF  LIMITED  WARRANTY  TO  REPLACEMENT  PARTS

.  The  terms  and  conditions  of  the  Limited 

Warranty  shall  apply  to  any  replacement  parts  provided  to  the  original  purchaser  by  Days  in  connection  with  any  warranty  claim.  Any 
replacement  part  is  warranted  for  the  balance  of  the  Limited  Warranty  Period  or  ninety  (90)  days  from  the  date  of  shipment  of  the 
replacement part, whichever is longer. No markup will be paid by Days for warranty parts. 

 

RETURNS POLICY

. This returns policy applies to all Products returned to Days from the original purchaser during the Limited 

Warranty Period. Prior authorization is required before any Product may be returned to Days. A Return Authorization Number is required 
for Days’ acceptance of returned Products. Warranty claims submitted without proof of the original purchase date are not covered by this 
Warranty and will be denied. Parts credit (if applicable) will be sent after Days tests the Product and validates the warranty claim.  

Please direct all questions concerning the Limited Warranty to: Days 

Corporation

 

Warranty Claims 
P.O. Box 668 
Elkhart, IN 46515 
Telephone:  1-866- 778-7665 
Facsimile:   1-574- 266-6083 

 
 
 
 

 

 

Rev. 12-2015

 

 

WARRANTY

 

 
 
 

Содержание Automatic Solar Blanket Reel System

















Отзывы: